CompTIA 220-901 A+ Pop Quiz Online – Quiz #1

When you start your computer, the screen remains blank and beeps twice. Which of these would be the most likely cause of this issue?

All of the pages printed from your laser printer smudge and smear when you touch the page. Which part of the laser printing process is most likely to be the cause of this issue?

You need to upgrade the memory in your company's computers. Which of these would be the best way to start the upgrade process?

Your company's shared laser printer occasionally reports an "out of memory" error. Which of these would be the most likely cause of this issue?

Which of these IPv6 addresses would be a compression of 2001:0db8:0000:0000:0000:ff00:0042:8329?

When you print your spreadsheet to your company's network printer, the paper is always fed from the first tray of the printer. Which of these would be the best way to change your output to print from a different printer tray?

Which wireless standard operates in the 2.4 GHz range and has a maximum throughput of 54 Mbit/s?

What does the D in DIMM refer to?

Which of these would be the decimal equivalent of a /16 subnet mask?

What of these tools would be the most appropriate when working with 110 blocks?

Your customer has just upgraded the operating system on their laptop, and they’re now complaining that information on the screen is blurry. Which of these is the most likely cause of this issue?

After upgrading your motherboard, you notice that the reset button on your case is not working. Which of these would be the most likely cause of this issue?

You're performing a fresh installation of Windows 7 on an older Windows XP Professional desktop PC, but the Windows 7 installation media won't boot from the DVD-ROM drive and always boots Windows XP normally. What is the most likely cause of this issue?

Which of these laser printing steps ensures that you will not see a "ghosted" image appear down the page of your output?

You are planning a network installation on the floor of a manufacturing facility, and you expect the network run will be less than 100 meters. Which of these cabling types will be the best choice to guarantee that the manufacturing equipment will not electrically interfere with the network link?

In which of these cases would you be most likely to use a port trigger?

What type of cabling is associated with F connectors?

Which of these would commonly be provided on an RCA connector?

You need to clean out the dust that has accumulated on the fans of your desktop computer. Why is it important to use a vacuum cleaner that has been designed for computer systems?

In which of these situations would you most likely modify the configuration of your BIOS?